How to send us large files for your Power Quality Health Check

By |2018-07-27T22:14:42+00:00July 27th, 2018|

Our uploads are currently limited to 200MB in order to ensure a consistent experience to all of our clients. If you require to send us files larger than 200MB please use wetransfer to send your data to support@powerqualityhealthcheck.com Once this has been done, you will also need to complete our upload form as normal with [...]

Datasheets

By |2018-06-25T10:10:31+00:00June 25th, 2018|

Download our Power Quality Health Check datasheet. Power Quality Health Check PDF  - "What is a Power Quality Health Check"  

How often should I do a Power Quality Health Check?

By |2018-03-22T19:28:17+00:00March 22nd, 2018|

As with all electrical testing, we would recommend that you do a Power Quality Health Check on an electrical installation every 12 months.  Depending on if the sites electrical characteristics change, for example when new equipment is installed, then a check could be performed before and after to make sure no new issues are identified.

How much does the Power Quality Health Check cost?

By |2018-03-22T19:26:39+00:00March 22nd, 2018|

We charge £150+VAT for the Power Quality Health Check report.  Cost of hiring the equipment can vary but is typically between £150 - £350 per week + VAT depending on the measurements and level of analysis the meter is able to make.  If you are having someone install, setup and download the meter this can [...]

How do I setup the meter for a Power Quality Health Check?

By |2018-03-22T19:26:04+00:00March 22nd, 2018|

Contact us with the make and model of the equipment you are planning on using.  We will advise on how to setup the equipment so we can analyse the data.  If there are any special requirements for your meter we will let you know.

What do I need to do for the Power Quality Health Check?

By |2018-03-22T19:25:17+00:00March 22nd, 2018|

If you already have access to a Power Quality Analyser, Power Quality Meter or Power Energy Logger then you are halfway there.  Set up your meter to record data for a one week survey of the electrical installation, upload the file you have recorded through our portal and we will do all the analysis of [...]

Where can I get the equipment to do a Power Quality Health Check?

By |2018-03-22T19:24:45+00:00March 22nd, 2018|

You can hire a meter from one of our recommended hire companies or if you are planning to use the equipment for future work we can also recommend equipment that we use ourselves for our own survey work and a local test equipment supplier who can supply it.

Go to Top